Thanks for visiting Satellite Frequencies. Please remember to bookmark this page Tool Coaxial. If you found what your looking for, then don"t forget to click an appreciation button below for this post.
 RG6 COAX COAXIAL COMPRESSION TOOL CRIMPER F CONNECTOR US $14.73 
|
 RG6/59 COMPRESSION TOOL COAX COAXIAL CRIMPER CONNECTOR US $10.05
|
 COMPRESSION TOOL COAX COAXIAL CRIMPER F RG6 CONNECTOR US $9.99
|
 Rotary Coax Coaxial Cable RG58 RG6 Stripper Cutter Tool US $2.42
|
 COAXIAL CABLE STRIPPER COAX STRIPPING TOOL FOR RG6 NEW! US $2.45
|
 Crimper Crimping tool F Connector RG6 RG59 Coaxial US $14.73
|
 NEW COAXIAL CABLE STRIPPER COAX STRIPPING TOOL RG59 RG6 US $2.35
|
 Rotary Coax Coaxial Cable Cutter Tool RG58 RG6 Stripper US $2.05
|
 COAXIAL COAX CABLE RG59 RG6 LNB STRIPPER STRIPPING TOOL US $6.87
|
 NEW IDEAL Stripmaster Coaxial Stripping Tool 45-282 US $26.24
|
 Coaxial Cable Cutter Stripper Stripping Tool RG59 RG6 US $1.00
|
 RG-6 RG-59 Coaxial Cable F-connector Hand Crimping Tool US $17.59
|
 RG6 COAXIAL CRIMPING TOOL F COMPRESSION COAX CONNECTORS US $26.39
|
 Rotary Coaxial Cable Stripper Cutter Tool For RG59 RG58 US $2.05
|
 NEW COMPRESSION TOOL COAXIAL CRIMPER RG6 CONNECTOR US $9.99
|
 NEW COMPRESSION COAXIAL CRIMPER F RG6 TOOL ADAPTER US $9.99
|
 USA RG6 RG59 COAX CABLE STRIPPING TOOL COAXIAL STRIPER Shipping from NC, USA US $6.00
|
 RG6 RG59 COAX COAXIAL cable STRIPPER STRIPPING TOOL 5PC US $29.99
|
 Rotary Coax Coaxial Cable Stripper Cutter Tool RG58 RG6 US $1.00
|
 RG59/6/7/11 Coaxial Cable Stripper Crimper Tool CAT 5 US $8.99
|
 25 F CONNECTOR / RG6 RG59 COAXIAL CABLE WIRE COMPRESSION STRIPPER CRIMPER TOOL US $36.34
|
 25 F CONNECTOR / RG6 RG59 RG58 COAXIAL CABLE COMPRESSION STRIPPER CRIMPER TOOL US $36.34
|
 Rotary Coax Coaxial Cable RG58 Stripper Cutter Tool I1 US $2.05
|
 COMPRESSION COAX COAXIAL CRIMPER F RG6 TOOL CONNECTOR US $9.99
|
 CABLE PRO COMPRESSION TOOL COAXIAL CRIMPER F RG6 RG59 US $.99
|
 COMPRESSION CRIMPER COAXIAL CRIMP RG6 SATELLITE TV TOOL US $.99
|
 PERFECT VISION PV25325 RG-6 Coaxial HEX CRIMPING Tool &10 RG6 10 RG59 CONNECTORS US $19.99
|
 Coaxial Cable Stripper RG59 RG58 RG62 Tool BNC COAX US $3.49
|
 COAXIAL CABLE STRIPPER COAX STRIPPING TOOL RG59 RG6 US $7.49
|
 COMMSCOPE 540-MSS Grounding Kit Preparation Tool for FXL-540 coaxial cable W/BOX US $25.00
|
 Gray Rotary Coaxial Cable Cutter Tool RG58 RG6 Stripper US $.99
|
 Lot 5 COAXIAL CABLE STRIPPER COAX STRIPPING TOOL RG59 RG6 3 pcs US $26.22
|
 Lot 10 COAXIAL CABLE STRIPPER COAX STRIPPING TOOL RG59 RG6 3 pcs US $47.99
|
 Lot 3 COAXIAL CABLE STRIPPER COAX STRIPPING TOOL RG59 RG6 3 pcs US $17.98
|
 RG11 RG7 RG6 RG59 Coaxial Cable Pocket Stripping Tool US $14.25
|
 Coaxial Cutter Rotary Cable Stripper TO RG59/58 Tool C US $2.05
|
 COMPRESSION F CONNECTOR TOOL COAXIAL CABLE STRIPPER RG6 FITTING CRIMPER RG59 HD US $23.08
|
 Rotary Coaxial Blade Cable Tool Stripper Slitter US $10.29
|
 KLEIN VDV010-019-SEN COAXIAL CABLE ALL-IN-ONE TOOL US $17.95
|
 .715 Coaxial Coring & Stripping Tool US $39.95
|
 F-connector RG6 RG59 coaxial cables assembly tool US $6.49
|
 Tessco Coaxial Crimp Tool Kit 41726 US $220.00
|
 Rotary COAXIAL COAX CABLE RG6 RG59 LNB STRIPPER STRIPPING Cutter TOOL US $2.42
|
 CABLE PRO COMPRESSION TOOL COAX COAXIAL CRIMPER F RG6 RG59 CONNECTOR ADAPTER US $9.99
|
 COMPRESSION TOOL CABLE CRIMPER RG6/59 COAX COAXIAL CONNECTOR US $9.99
|
 Rotary Coax Coaxial Cable RG58 Stripper Cutter Tool P US $2.05
|
 COMPRESSION SATELLITE TV TOOL COAX COAXIAL CRIMPER F RG6 RG59 CONNECTOR US $9.98
|
 Coaxial Cable Flaring and "F" Connector Attachment Tool US $8.95
|
 Coax cable cutter coaxial Rg58 Rg6 rotary stripper tool FREE SHIPPING US $19.99
|
 Coaxial Cable Compression Crimp Tool For RG58/59/6 (F, BNC, RCA) US $26.50
|
 Rotary Coax Coaxial Cable Cutter Tool RG58 RG6 Stripper Coax Rotary Cutter US $2.05
|
 Compression Crimp Tool RG-59 RG-6 Coaxial - PVLLCDLX US $24.99
|
 Rotary Coax Coaxial Cable RG58 Stripper Cutter Tool F US $2.05
|
 Channel Master PCT PCTECNCT RG6 RG59 Coaxial Cable Connector Compression Tool US $29.46
|
 PCT Series 8120MT RG6 RG59 Cable Preparation Coaxial Cable Stripper Tool 8120MT US $29.46
|
 Channel Master CM PREP RG6 RG59 Universal Coaxial Cable Stripper Tool CMPREP US $39.29
|
 Ripley Universal Rg59 Rg6 Coaxial Cable Compression Connector Tool US $25.00
|
 Professional Coaxial Cable Crimp Tool RG58, RG59, RG6 US $29.42
|
 Rg59-Rg6-Rg11 Coax/Coaxial Cable Universal Compression Connector Blue Tech Tool US $23.99
|
 XCELITE ERGO CRIMP TOOL CRIMPER COAXIAL RG6 ECP-107 US $99.99
|
 Compression Crimp Tool RG-59 RG-6 Coaxial US $24.99
|
 NEW Compression Tool RG59, RG6, F-pin, BNC, RCA (Coaxial Cable) US $26.50
|
Tool Coaxial
Car Speakers
After the response from the power capacitor article, there have been many requests for an article on speakers and which ones are the best to have as well as how to choose the speakers for your ideal car audio system. So if you want to know the basics behind creating a car audio system so great that it almost feels as if Linkin Park are rocking out in your back seats while jay z is sitting next to you telling you about his 99 problems, then you’ll want to give this a read... just my 2 cents...
Speakers
Speakers (drivers) are a vital part of car audio systems. They take charge of reproducing the sound from electrical to audible. They work by vibrating the air around the speaker when an electrical current is passed through them. This is why it is important to choose the best speakers that your budget will allow. This will give you end impression that you would feel that you were in a live concert hall; with the artist next to you actually singing live!
Types of speaker
There are usually four types of speaker used in car audio set ups. For the low end of the sound spectrum, subwoofers and mid-bass drivers are used; the middle of the sound spectrum is taken care of by the mid-range drivers while the high end is reproduced by tweeters. There are also speakers such as 6x9’s that are able to produce a broader spectrum of sound than a standard midrange driver on its own for example and also the design of the speaker varies depending on the intended use.
Tweeters
Tweeters are used to play the high end of the sound spectrum. Due to the nature of the speaker, either an inline capacitor or a crossover is used to filter the sound out to ensure that only the frequencies that the tweeter is designed to play are sent to the tweeter. The crossover may also aid in reducing damage to the tweeter, as well as increasing efficiency of the speaker. With my car, I chose to install a separate pair of JBL GTO-18T tweeters that are running directly of the head unit. This is purely to aid my pursuit to produce a special sound in the car as opposed to just sound coming directly from the speakers.
Midrange speaker
The midrange is a vital part of a car audio system. It is in theory possible to run a car audio system solely of midrange speakers however for someone wishing to recreate sound at a high level, it is unheard of. The midrange speakers come in a variety of sizes to fit the different door panels. Unlike subwoofers for example, midrange speakers are able to run directly off the head unit however it is common to see that if the head unit is turned too high, then distortion can be heard (clipping). This is why many people choose to add an amplifier to amplify the signal sent to the midrange speakers so that at high volumes, a cleaner signal is being sent to the speakers. Again some will choose to use a crossover system to limit certain frequencies to be reproduced by the midrange speaker. There are two types of midrange speaker, component and coaxial. The difference between component and coaxial is design. With a pair of component speakers, the tweeter is separate to the main driver whereas with a coaxial speaker, the design is of an all-in-one nature. The difference is in the type of sound produced. As coaxial speakers are all in one, the sound comes from one location, however with component speakers, the tweeter is separate thus it is able to achieve a more spatial sound. Due to the benefits offered with a set of component speakers, in my car, I have chosen to use one pair of JBL component speakers to act as the ‘front speakers’ as well as a pair of JBL coaxial speakers as ‘rear speakers’ even though they both have been installed in the door. The reason for this is that my car, out of the factory only has 2 speakers, one in each door. This left me with the problem of how I was going to achieve a spatial sound. To go about this, ideally I needed to have another pair of speakers acting as the ‘rear’ speakers. This is why I had chosen to use a set of coaxial speakers for the rear speakers and a set of component speakers for the ‘front’ speakers. The idea of this would be to achieve a surround sound from the system while inside the car, and given the conditions I had to work with, I’m pretty happy with the turnout of the overall system.
Mid bass
Mid bass drivers produce frequencies between the subwoofer and the midrange speakers. Some people argue that they are not a vital part of a system while others swear by them. For some simple systems, the mid bass driver can be a vital tool if someone is aiming to achieve clarity over loudness, as again, it would be separating the sound spectrum even more to each of the components so that fidelity will be increased. For my project, I had decided against the use of mid bass drivers purely dude to space confinements of my project car.
Subwoofers
Subwoofers come in a variety of sizes usually 8, 10, 12, 15 and 18 inches. They are used to produce the low frequencies. Almost all subwoofers are amplified due to their demand for high power; however a few head units and subwoofers from pioneer are able to work together without the use of an amplifier. Some subwoofers require an enclosure, this may be a sealed or vented enclosure with some subwoofers being free-to-air, i.e. they will work without the use of an enclosure, and however these subwoofers on average require more power than a subwoofer of equivalent sound output that requires the use of an enclosure. Free-to-air subs have also been commented on by many people who say that they find that type of bass that is produced is not of the same standard or quality even though they are rated at the same power. There are also active bass boxes where the amp, subwoofer and the enclosure are all built into one unit however they, on average tend to have a lower power output than say a separate sub/amp combination. This is why many people will choose an enclosure type subwoofer. The presence of a port will adapt the type of bass produced. With a port, many people find that there is more bass produced (as the subwoofer is moving the air through a tuned port, however there is less definition in terms of the sound. With a sealed enclosure however, the bass produced can be described as more of a tighter sounding bass as the air is moved inside the box, however the use of a sealed enclosure will also put more strain on the subwoofer, due to the pressure levels built up inside of the enclosure.
While doing some research for my enclosure, I found that the size of the enclosure makes a massive difference. After choosing the Kicker L7, I had two options for my enclosure, to either use a sealed box that would be very small (the benefit would also be to save space) or if I wanted to use a ported box, then the size would be much larger and the effect of the bass would be different as greater pressure levels could be built up inside the car with a slot ported box, which is why I chose the ported box.
Power ratings
Power ratings determine what power each component is able to handle at continuous and at maximum. For example, a speaker may have a rating of 45w RMS and 135w MAX. The RMS indicated is the maximum amount of continuous power that can run through without bringing about damage to the component and the max is how much power the component can handle for a short period of time this is why it is important to ensure that the components are not supplied with too much power. Most head units are capable of producing 50Wx4 max on average however some amplifiers are able to produce 50Wx4 RMS and upwards. For my set-up I went for a system what would be able to output 50Wx4 rms. I felt that this would result in a small enough amplifier as well as giving me the midrange punch that I desired.
Other speakers
Traditionally speakers come in round shapes. However there are speakers that come in different shapes and sizes. For example, recently, companies such as Kicker and Sony have released subwoofers that are different in size to the traditional round subwoofer. There are also oblong shaped speakers such as the popular 6x9’s, as well as 4x6, 5x7 and 6x8.
There are tweeters known as super-tweeters. They are similar to tweeters in the sense that they produce the high end frequencies however they able to produce frequencies that are beyond that of conventional tweeters. Bullet tweeters are a type of super tweeter. They are called bullet tweeters due to their name. They usually work by having an inline capacitor when connected to a signal. Some people choose to use piezo electric tweeters in their cars in addition to conventional tweeters. The piezo electric tweeters, like the bullet tweeters are known as super-tweeters and are chosen due to their high power rating and their durability. The piezo tweeters do not require anything to limit the frequencies that are delivered to the component due to the way they are manufactured, their high impedance acts as a filter. Some people however find that the sound they produce is not of very high quality however I’m yet to test out a pair of piezo tweeter in my system, but it is one of the next additions I am looking to install.
Conclusion
At the end of the day, it is important to keep in mind that if you’re looking for that full bodied sound that you ensure that your system is able to reproduce the whole sound spectrum, this will include a subwoofer of some sort for the bass, usually many people bypass the mid-bass drivers and will use midrange drivers as well as tweeters and this will be enough to produce a full sound. I personally have a pair of coaxial and component midrange speakers, a pair of bullet tweeters and a Kicker L7 to the end result being enough to bring a smile to my face every time!
Hope this was helpful...
Neil Patel
About the Author
If you are looking for a different item here are a list of related products on Satellite Frequencies, please check out the following:
