Thanks for visiting Satellite Frequencies. Please remember to bookmark this page Module Adapter. If you found what your looking for, then don"t forget to click an appreciation button below for this post.
 1 MODULE OF 2 Pre-Mounted OPA627AU Op-amps on Adapter US $20.00 
|
 Spracht CP-2016-003 Spracht Digital Pbx Adapter Module US $92.64
|
 SK900 8PSK Module Board Adapter For iLink IS-9600 HD FTA Receiver SK900V 8-PSK US $29.99
|
 OEM!! LG LSB316 WIRELESS ADAPTER MODULE CARD DWAM82-DB EAT61013302 US $29.99
|
 NIB LEVITON 47608-A VIDEO SERVICE MODULE WITH ADAPTER US $65.00
|
 OEM!! LG LSB316 WIRELESS ADAPTER MODULE CARD DWAM82-DB EAT61013305 US $17.59
|
 Extron RGB 580xi S AAP VGA/Audio Adapter Module RGBHV 70-134-01 US $49.99
|
 20 LOT keystone Module RG6 F-F COAX White Insert F Type Jack Adapter QTY US $114.85
|
 25 LOT keystone Module RG6 F-F COAX White Insert F Type Jack Adapter QTY US $118.85
|
 50 LOT keystone Module RG6 F-F COAX White Insert F Type Jack Adapter QTY US $126.39
|
 Snap in F-Type Insert Keystone Module Coax Jack Adapter RG59 RG6 F81 White US $1.75
|
 Freesat 800 HD/800HD FTA Receiver + SK200 8PSK Module Board Adapter Installed US $270.00
|
 Freesat 800 HD FTA Receiver + SK900V/SK900 8PSK Module Board Adapter Installed US $255.00
|
 New SK200 8PSK Module Board Adapter For Freesat 800 HD FTA Receiver SK-200 8-PSK US $27.99
|
 New SK900 8PSK Module Board Adapter For Freesat 800 HD FTA Receiver SK900V 8-PSK US $29.99
|
 New LS400 QPSK/8-PSK LS-400 Module Board Adapter For Limesat HD Air Receiver US $48.25
|
 10 Qty keystone Module RCA RED F-F Plate Ivory Insert Jack Adapter lot US $13.85
|
 10 Qty keystone Module RCA White F-F Plate Ivory Insert Jack Adapter lot US $13.85
|
 10 Qty keystone Module RCA blue F-F Plate Ivory Insert Jack Adapter lot US $13.85
|
 10 Qty keystone Module RCA Green F-F Plate White Insert Jack Adapter lot US $13.85
|
 10 Qty keystone Module RCA White F-F Plate White Insert Jack Adapter lot US $13.85
|
 10 Qty keystone Module RCA Green F-F Plate Ivory Insert Jack Adapter lot US $13.85
|
 10 Qty keystone Module RCA blue F-F Plate White Insert Jack Adapter lot US $13.85
|
 10 Qty keystone Module RCA RED F-F Plate White Insert Jack Adapter lot US $13.85
|
 iLink IS-9600 HD FTA Receiver + SK900V/SK900 8PSK Module Board Adapter Installed US $299.00
|
 SK200 8PSK Module Board Adapter For iLink IS-9600 HD FTA Receiver SK-200 8-PSK US $27.99
|
 iLink IS-9600 HD FTA Receiver + SK200/SK-200 8PSK Module Board Adapter Installed US $299.00
|
Module Adapter
How to install external Bluetooth adapter inside the laptop
Before I started hacking my laptop, I installed Bluetooth software and tested if the new adapter works fine. As you see on the picture below, the Bluetooth icon in the SysTray is active and the mobile phone is detected.
For this modification you’ll need:
1. Laptop disassembly experience. Here are service manuals for some laptops.
2. Soldering skills and tools as I mentioned in the power jack repair post.
3. Inexpensive USB Bluetooth 2.0 adapter. You can find it even cheaper in this only for experienced technicians. If you have no experience you can (and most likely will) damage your laptop. Proceed on your own risk!
This guide should works for all laptop brands: Toshiba, Dell, HP/Compaq, IBM, Lenovo, Gateway, etc… as long as you have enough space to mount the Bluetooth module inside the laptop. http://www.papatek.com/LCD-Panel/
OK, here’s how I did it.
First of all, I disassembled my laptop and found a place where I can install the Bluetooth adapter. In my guide I’m using a Toshiba Satellite A105 laptop. I found enough empty space in the top right corner of the laptop.
My idea was simple. Disassemble the Bluetooth adapter, remove the Bluetooth module and solder it to one of the USB ports. I decided to use one of the USB ports located in the lower right corner.
NOTE: After this modification is done, you will not be able to use that particular USB port with any other USB device, it will not work because it’s dedicated to the Bluetooth module. But I think it’s not a big deal because most laptops have 3-4 USB ports. http://www.papatek.com/Cell-Phone-Accessories/
I found some thin wires laying around.
Make sure that wires are long enough for your project.
Now you’ll have to disassemble the adapter. I easily split the adapter case with a sharp knife and removed the Bluetooth module.
Unsolder the USB connector.As you see on the picture below, the Bluetooth module easily fits into the empty place inside the laptop.
I soldered four wires to the Bluetooth module. I used terminals for the USB connector.
After that I soldered four wires to four contacts on the back of the USB connector. Be careful. Make sure all wires are connected correctly.
At the last step I installed the Bluetooth module into the place and routed wires from the module to the USB port. I had to reroute the wires a few times to make sure that I can install the top cover and it seats properly. I secured wires to the motherboard with electrical tape.
http://www.papatek.com/Cell-Phone-Accessories/iPhone-3Gs-Bluetooth-FM-Transmitter.html
Finally, assembled the laptop and tested it. There is no on/off hardware switch for the Bluetooth module but I can turn it on and off through software.
The Bluetooth adapter has been installed INSIDE the laptop and works flawlessly!
About the Author
If you are looking for a different item here are a list of related products on Satellite Frequencies, please check out the following:
